night lite navigation

aimstudio · 2017-03-04T21:15:47.000Z

Yes but it would need an additional epoxy coat to make it waterproof

3dprintdirect · 2017-03-04T21:17:21.000Z

Hello Roger, we’ve done several projects for deep sea applications in our Graphite-SLS material. That build size is ok. Kevin

Bassmaria · 2017-03-04T21:31:14.000Z

Hi,

I need to see your project. -I can print 200 x200 mm.

Mora 3D Printing’s Hub Dashboard

PlastiPrint3D · 2017-03-04T21:33:27.000Z

Located in UK. Drop me a line if you are as well.

Bassmaria · 2017-03-04T21:35:17.000Z

Sweden.

AmazCreate3D · 2017-03-04T21:36:16.000Z

Sure i could do that with the ultimaker 3. Where are you located?

Nathan

MarkHeller · 2017-03-04T21:44:43.000Z

I can handle up to 306x278x306mm.

I’ve got a Fusion3 F306 commercial grade printer.

Hubs

Online 3D Printing Service | Instant 3D Printing Quotes | Hubs

Professional 3D printing service for rapid prototypes & production parts. Instant 3D printing quotes for 1-1,000 units. FDM, SLS, MJF & SLA. 25+ materials.

info@markheller3d.com

AmazCreate3D · 2017-03-04T21:54:54.000Z

ok ya im in ontario little bit of a distance eh

JeremiahTimmins · 2017-03-04T22:54:37.000Z

Hi Roger,

I could help you with this: my printer volume exceeds 150mm, I can create the model and alterations using PLA or ABS, and have the finished product delivered to you or destination of your choosing.

Thank you for your consideration

Optimus_prints · 2017-03-04T23:36:08.000Z

yep but would need more details

Right_2_Make · 2017-03-05T01:32:23.000Z

looks like you have your work cut out for you based on the responses, but if your looking for a “case”, remember that FDM will not be sealed as it is not solid and produces porous parts. The material chosen plays a big factor in this as well, but even vases made from these machines have difficutly retaining water at their raw state. Even finishing techniques fail for pressure testing cases. But then again its just a prototype, right? I am sure you will get a decent print and response time with any hub you choose… Good luck.

PrintableCanada · 2017-03-05T03:49:15.000Z

Hi, if you could be more specific in regards to the design such as any files you have or any blueprints you might have drawn up, we’ll see if we can work anything out for you. Let us know, thanks!

Shomar3D · 2017-03-05T04:21:43.000Z

I could do that. Let us discuss this further

Heramb_Makerlab · 2017-03-05T04:58:58.000Z

Please provide stl file on email 3dsales@snsprototyping.com - check out our profile on www.snsprototyping.co.in

3DPrintedDebris · 2017-03-05T06:06:26.000Z

I can handle 150+ no problem. E-mail me at 3dprinteddebris@gmail.com!

-Derek

broncosis · 2017-03-05T07:41:21.000Z

How tall I can do it in pla Just designed a fan duct for a rc hover craft that is 180mm in diameter Send me a message we can talk more

broncosis · 2017-03-05T07:46:16.000Z

Would not be that hard to give it good coat Of resin and seal it up or make it in fiber glass using a 3d printed plug/mold kinda sounds like a fun project

Youi · 2017-03-05T07:51:31.000Z

Hi Bennison93, can you share more details, as i think we can work this out (production wise)

BR,

Haim Menachem

Youi3d

Tiaspace · 2017-03-05T09:33:53.000Z

*

FabbIt · 2017-03-05T12:54:04.000Z

I could handle it in 5 different technologies.

Just send me an e-mail with that part to :

info@Fabb-It.com