night lite navigation

acvigue · 2017-03-04T20:13:45.000Z

We can print that in multiple materials and colors including nylon, n-vent, PLA, NinjaFlex and more. Contact us at

Starting at $3.00

LeeSaund · 2017-03-04T20:18:02.000Z

Hey,

Our hub is LeeSaund Printing and is located in Calgary, Alberta. Depending on your location we can definitely help you with this. You can also contact us through our email: leesaundprinting@gmail.com.

Thanks,

Mark Saunderson

3Dscaleworks · 2017-03-04T20:25:53.000Z

If you have a design or STL and could tell me more about the use, i would be glad to help you out

cheers

John

Just3D · 2017-03-04T20:26:24.000Z

Hello, Like MattG said most can handle that size. If you are in prototype stage I would recommend looking on 3D Hubs for a local source. This way you can work more closely with them to get exactly what you need.

Monsterkyle21 · 2017-03-04T20:31:49.000Z

Message me. I’d be very interested in it. Do you need a design too?

CustomSolutions · 2017-03-04T20:48:14.000Z

I have several machines that can handle upt0 200mm currently.

3DKernow · 2017-03-04T21:04:00.000Z

Should be able to do this, using an Ultimaker 3 which gives particularly good results should any scaffolding be needed. Check me out as 3D Kernow

themake · 2017-03-04T21:07:22.000Z

Right to the edge on a makerbot 6x9

but yes I can print it. PLA if prototype

ABS if working prototype (h2o safe).

My3DPart · 2017-03-04T21:14:46.000Z

Hi,

no problem for me.

for marine use no problem…Also

Best.

aimstudio · 2017-03-04T21:15:47.000Z

Yes but it would need an additional epoxy coat to make it waterproof

3dprintdirect · 2017-03-04T21:17:21.000Z

Hello Roger, we’ve done several projects for deep sea applications in our Graphite-SLS material. That build size is ok. Kevin

Bassmaria · 2017-03-04T21:31:14.000Z

Hi,

I need to see your project. -I can print 200 x200 mm.

Mora 3D Printing’s Hub Dashboard

PlastiPrint3D · 2017-03-04T21:33:27.000Z

Located in UK. Drop me a line if you are as well.

Bassmaria · 2017-03-04T21:35:17.000Z

Sweden.

AmazCreate3D · 2017-03-04T21:36:16.000Z

Sure i could do that with the ultimaker 3. Where are you located?

Nathan

MarkHeller · 2017-03-04T21:44:43.000Z

I can handle up to 306x278x306mm.

I’ve got a Fusion3 F306 commercial grade printer.

Hubs

Online 3D Printing Service | Instant 3D Printing Quotes | Hubs

Professional 3D printing service for rapid prototypes & production parts. Instant 3D printing quotes for 1-1,000 units. FDM, SLS, MJF & SLA. 25+ materials.

info@markheller3d.com

AmazCreate3D · 2017-03-04T21:54:54.000Z

ok ya im in ontario little bit of a distance eh

JeremiahTimmins · 2017-03-04T22:54:37.000Z

Hi Roger,

I could help you with this: my printer volume exceeds 150mm, I can create the model and alterations using PLA or ABS, and have the finished product delivered to you or destination of your choosing.

Thank you for your consideration

Optimus_prints · 2017-03-04T23:36:08.000Z

yep but would need more details

Right_2_Make · 2017-03-05T01:32:23.000Z

looks like you have your work cut out for you based on the responses, but if your looking for a “case”, remember that FDM will not be sealed as it is not solid and produces porous parts. The material chosen plays a big factor in this as well, but even vases made from these machines have difficutly retaining water at their raw state. Even finishing techniques fail for pressure testing cases. But then again its just a prototype, right? I am sure you will get a decent print and response time with any hub you choose… Good luck.