Mass (Batch) Produce a 3D Printed Product

seangeraghty · 2015-08-26T15:55:26.000Z

If I were to look at mass/batch producing a 3D printed product, do you guys know of any places where this could be achieved? Or how I should go about finding out such information?

Thanks

MB3D · 2015-08-26T18:24:43.000Z

Can you go into detail about what you want to produce in mass quantities? How many parts do you need?

Luuk · 2015-08-27T07:20:35.000Z

+1 on Marius’ comment. Sometimes mass production with 3D printing is perfect, but more often there are other manufacturing techniques that will be cheaper/faster. It all depends on what you’re looking for. If you want you can reach me on luuk@3dhubs.com

seangeraghty · 2015-09-01T10:39:30.000Z

So, basically I have a product that I think is pretty much only achievable via 3D printing (mainly due to its form and complexity). It is around 15x15x25cm in size, so rather large; but there are holes in the mesh of only a few mm which I think could make it hard to produce in any other manner.

What do you think?

Thanks,

Sean