19

Seattle, WA

Filament and Resin 3d printing. PLA, TPU, ABS, PETG, ePC, WoodFill(most colors available). Regular Resins (Monocure Rapid, Wanhao, Fun To Do Resins, black, gray, clear and white)

10 FDM Printers and can print max of 400x400x500 for PLA. 2 DLP Printers

20

I’m still really miffed about all this, but what the heck. I have two Monoprice MInis, 120x120,120, work in PLA, relatively high precision work.

21

My company website is www.hudsondesignlabs.com
Before the change, I was one of the highest rated Hubs in my area.
I offer FDM 3D printing, laser engraving and cutting, PCB design and prototyping, and product development services including CAD. I have a large inventory of material that you can see on my website.

23

Not you too @Ara!!! You were my go-to guy when I was ramping up, how could 3DH not qualify you?

24

I qualified to be in the new program but I don’t know how much work I will get…TBD

26

2 posts were merged into an existing topic: Switch to Fulfilled by 3D Hubs announcement

27

Hello, I would like to be added as well. I have an FDM Lulzbot Mini 3D Printer, which is capable of printing a variety of materials. This includes ABS, PLA, HIPS, PVA, Bronze, Copper, Wood, Polyester (Tritan), PETT, Polycarbonate, PETG, etc. Currently, I only have in stock PLA in a variety of colors. These are White, Red, Orange, Translucent Orange, Green, Teal, Translucent Blue, Blue, and Purple. Unfortunately, I am not able to do 3D Modeling. Thank you!

29

I’m in Berkeley, CA and I have a Formlabs Form 2 printer with various materials. I don’t have a 3D printing company or website, I just want to keep doing what I was doing through 3DHubs as an individual. I have all the finishing equipment and a high attention to detail. I can also do modeling with Fusion 360 and Solidworks. You can contact me at dude8604+3d at gmail dot com. Thanks.

30

Hey Dude,

I’m up against a deadline on a job and would like to have you print a couple parts for me tonight. I’m in Marin. Email me at my throwaway because apparently 3DHubs wont even let us message each other anymore? Email me ASAP theshell5519@gmail

My name is David and the job would be a couple pieces, FDM, 200micron resolution in black PLA requiring about a 6X6X6 print area. They take about 3 hours each on my printer and without a time machine, I am not going to make it…

Anyone else in my area who sees this, feel free to reach out as well. I am not going to pull this off without some help and am willing to pay and drive around the SF Bay Area if need be. The print quality/material and ability to crank out a couple parts tonight is crucial though.

Thank you,
David

Also, I offer 3D design as well as FDM printing service in Marin County, CA. Feel free to contact me if you’d like something modeled and/or printed. Just… not tonight.

32

I am still interested in offering my service printing for people like 3D Hubs was originally set up to do. I currently have 4 FDM printers, Prusa I3 MK2S with MMU, Creality CR10S, Creality Ender 3 Pro, FLSUN Cube, and a GEETECH i3. I also have a smaller Resin Printer the Spark Maker.

1 Like
33

We provide design and 3D modeling services. We currently offer FDM printed parts and have red, orange, yellow, green, dark blue, black, grey, white, and translucent white PLA in stock. We can also print ABS, PETG, and TPU (only for smaller parts) and have limited supplies of TPU currently in stock. We can get most materials/color in stock within 48 hours of receiving a request. For some parts, we can apply matte and glossy coatings (for aesthetic purposes only). Maximum print size is 200x200x175mm.

An independent website with ordering capabilities is in the works.

34

Bellair3D…see Bellair3D Manufacturing l Local 3D Printing — Marshall Bronfin's Portfolio.

Two Prusa printers which allow me to do great quality prints at a good value. Also can do 3D modeling. Currently in the NYC area.

Printing in mainly PLA (tons of colors), PETG and TPU but willing to do ABS and nylons if requested.

35

I have the following
600x600x600mm printer (ABS,PLA,PETG)
SLA Form2 printer
CR-10
3d scanning
3d modeling
vacuforming

36

Please add my business “NDS 3D Printing” , I am located near Salem Oregon and have been involved in 3D printing for 4 years. Ihave 2 Anet A8s, 2 Davinci XYZ Pros (3rd party filament upgraded) 2 robo3D II printers. I print TPU, Wood, ABS, PETG, all manner of PLA and Nylon. Capable of any type of filaments used in non commercial printers. I am well versed in the AutoDesk Inventor software and Fusion 360. Usr multiple slicers, and I have 2 3D scanning systems. Thank you!

41

Hello Everyone, My small business is From Mind To Matter 3D printing & Design. We bring your ideas to life! We’re able to take customer’s ideas and concepts and turn them into designs and eventually a tangible object that fulfills the needs of the customer’s project.
I can print multiple colors PLA,ABS, Nylon filaments, usually cheaper than the competition!
I can be contacted at [frommindtomatter3D@gmail.com]

42

Hi,

I am looking for someone in the Minneapolis area (no remote) who wants to do 3d printing full time. The job pays very well. We are looking for someone who has Electro-Mechanical Skills and with desktop, networking and repair background. This could be a great start for someone who is looking for full time work and experience.

Only need Highschool education (with field experience) and a clean driving history.

Shoot me an email @ iheineman@yahoo.com

43

Please add me:

I specialize in professional grade 3D printing and additive manufacturing for all FDM materials, Large, complex, high production grade quality. Top of the line production grade Stratasys FDM 3D printers= Fortus 900MC, 450MC, 400MC, and 360MC machines.
We offer every FDM material available on every machine we have. We also offer composite mold making, composite prototyping and production as well silicone molds making and urethane castings. Located in southern CA email cft3.tony@gmail.com

44

We are a small business in Nashville, Tennessee with 3D modeling, 3D printing services, custom computer desktops, and many other technology support in the Tennessee. We have been printing for 2 years with 4 Creality 3D Printers (FDM printed parts). We print PLA, TPU, Wood, and PETG in many different colors (red, orange, yellow, green, dark blue, black, grey, white).

Contact us via email techsupport@bectcomputing.com or you can contact us on our contact page for orders . Maximum print size is 300 x300x400mm.

45

I would love to offer my 3D modeling and printing services. I have a Markforged printer that prints in Markforged proprietary Onyx material which is Nylon with chopped Carbon Fiber. I have 10 years of 3D modeling experience with Solidworks and I would love to assist on any projects. For inquires contact kyle@bluehorizonengineering.com

Kyle

46

I recognize that this thread is for people offering services. Is there anyone in the Boston or south of Boston area here, or could you please guide me to the listing of those services in this area.