leapfrog creatr HS

[navidshalchi]

hi

i have a creatr Hs 3d printer but it dont extrude correctly sometimes i change hot ends but dont resolve this problem why?

[ItsJustMidnight]

Hey Navid,

my first few guesses would be cleaning your hotends, increasing temperature, checking your extruder steps per mm are correct and trying different material. I don’t have experience with Leapfrog’s, so maybe actual owners have some more detailed advice.

Sincerely,

Jonas

[navidshalchi]

thank you for your help

best rigards

[3Dscaleworks]

I have a Leapfrog and i agree with Jonas.

Most of the time you see this with ABS.

Do you have sinplify as slicer?

Tryals to play wth outline overlap if you have Simplfy,

succes

John

[3DBazaar]

I’m not sure, but doesn’t it look like over extrusion in the top left corner?

[Fabbdea]

settings?material?anything?

[MB3D]

This looks like underextrusion and like having a partially clogged nozzle. There are several solutions to removing cloggs around the internet so just check google and YouTube.

Take a look at the youtube channel of “Thomas Sanladerer” he has some videos in which he explains how to set up the printer, extrusion multiplier and more.

Cheers,

Marius Breuer

[navidshalchi]

these pictures that i attach printed with 235c tempertur

[navidshalchi]

thank you every body for your helps

[Mr_Fox]

Hi navidshalchi, I have a Creatr HS and I agree with the already said facts. Please try to clean the nozzle. A hot fix could be to use the 2. nozzle, if you own the creatr with double extruder. In fact those gaps in the print can also result in a extrusion failure. Thus please check if the extruders continuosly pushes the filament forward. Otherwise adjusts those preasure. An other option could be a incorrect value for retraction. This value is could change with each filament and needs adjustment. P.S.: I invested over 80 hours of adjustment into my Leapfrog Creatr HS (2 extruders) until the print result was satisfactory. Therefore keep on trying Regards, Mr_Fox

[theb1rd]

Looks like a mix of under/over extrusion issues and/or possibly the filament is getting stuck on the spool.