I’m Shaun, a 4th year Computer Engineering student at UVic. I’ve recently gotten into 3D printing. I have a Robox printer from CEL and I’ve melted my way through a few spools of filament. I’ll be getting their dual material head in late spring to try out printing with two types of filament in the same model. I have modelling experience in Sketchup and SolidWorks, and I clean up STLs for printing in netFabb and MeshLab.
I’ve printed in PLA and ABS so far, and I am ordering some PET and HIPS filament to try out.
It sounds like you’ve had a lot of experience with 3D printing so far. I’ve only used ABS with my Da Vinci AiO, but I’m limited to which filament I use as it must be Da Vincis own. I’d definitely like to gain another printer to experiment with various filaments. Please tell me how the HIPS and PET filaments work out.
It DOES sound like you have had a fair amount of 3D Printing experience. I personally own a Lulzbot Mini, and I have gotten the chance to work with a Makerbot Replicator 2. Using my Lulzbot, I can tell you that HIPS is actually a great filament! However, I wouldn’t recommend buying the cheaper eSun filament. I wish you good luck in the world of 3D Printing. It is very very exciting!
Myself and my room mate have also recently gotten into 3D printing. I saw this opensource robotic telescope I wanted to build, but mech department would not allow me access to the school’s Ultimakers.
The more I read up on 3D printing, the more I just kept geeking out…So I ended up buying a barely used Ultimaker 2 Extended for a really good deal. Since, my room mate has decided to go half’s on the printer with me. We’ve going through a few rolls of filament. We’ve tried the Ultimaker brand, but honestly I’ve been blown away at how much better the ColorFabb filament has been. It’s like a night and day difference for us, and definitely worth the extra money based on the results.
I’m really starting to see excellent results after hours and hours of testing, and whatnot. Probably going to try some corkfill, and copper fill filament soon enough.
I thought this hub someone using the Ultimakers in the ELW lab! Those things are sexy, all lined up on the bench.
When I was in the researching phase I was really looking hard at getting a TAZ (and took a decent look at the Ultimaker as well). I ended up going for the Robox. The upside is that I am getting pretty nice results right out of the box. The downside is that I am limited to Cura as my slicer, and I don’t get direct access to it as the AutoMaker software for the printer has to postprocess the gcode to accommodate the needle valves that the Robox uses in the print head. That, and the build area has been smaller than I’d like (at least the z axis height) a couple times.
I swung towards the Robox because I wanted their dual material head and I liked the attention put into making quality prints. They took a little longer to get the hardware and software working together, but I should have a dual material head in the next month or two as the backorders are serviced. I’m really anxious to try dual colour, and dual material prints! Printing NinjaFlex (or other TPU filament) directly onto ABS sounds awesome - they apparently adhere nicely to each other. Having dedicated support material, etc, etc, etc.
If I get further into 3D printing, depending on the state of the art at the time, I might still get that TAZ for the build area!
What day?? I’m just a little tight on time with finals and all to take the time and figure out what we’re gonna get. What constitutes a large order? Would voxel factory give a discount if it was large enough? I’m thinking about getting 4 rolls, but I need to spend some time figuring out exactly what we want.
Let me know what day your going to order, and I’ll try to figure it out before then. If I can’t no worries, maybe next batch! I know if I order about 3 or 4 rolls the shipping costs becomes reasonable.
We ended up just ordering 6 rolls on our as we never heard from you.
Let us know next time your planning on another order, or we can let you guys know. We’re just flying through material right now, so it probably won’t be long.
I’m kind of slack checking the browse talk forums… I really should do it more often.
Unfortunately, Voxel doesn’t seem to offer free shipping over a certain amount, at least we haven’t hit that point. That being said, I do know there prices are super cheap compared to a lot of colorfabb distributors. There’s guys from the states purchasing through them… It seems as soon as you hit about 3 rolls it works out to be about 50 bucks including shipping, which isn’t to bad.
I tried speaking to the guy in Sydney about colorfabb, but he tried saying price matching was $50, when Voxel is charging $39… I kindly explained that’s not how price matching works lol… It’s highly unfortunate, as he’s seriously missing out on sales, and honestly, I much rather support a local business. Oh well…
Not sure when we’ll be ordering next, but I’ll post in here again. Shouldn’t be too long. I’ll make sure to check back next time… Sorry about that.
