Improving prints

[Nicholas_Fazio]

My da vinchi is printing solid layers sloppy. Any ideas?

[3Dscaleworks]

rase the retraction speed al little bit ans give a lower first layer speed

[Pot8oSH3D]

Hey Nicholas,

Looks like the nozzle is dragging through still-molten material. Maybe your fan isn’t blowing onto the print?

Cheers,

AndyL

Pot8oSh3D

My Hub

[Alex3DHubs]

I second what Andy says. Also, could be a temp problem.

[zarhey]

It because file stl, or obj have not 1 closed mash, it have more than 1.
Slyser think it leaky between meshes.
Boolean operation needed to unity all of the mesh,
It’s mistake of model.
Need check level of bed. Too close to nosel, that’s why first level too slim.