Flashforge Creator Pro - Exotics materials support?

pro343 · 2015-11-25T05:41:45.000Z

In 2016 guild I see only PLA, ABS, PVA. Exotics is not supported?

waddell_fields · 2015-11-25T16:31:02.000Z

I was told that we could use Wood, Glow-in-the-Dark, Flex and Sun Changing Filaments as well.

JohnnyVF · 2015-11-26T13:36:44.000Z

I have the PowerSpec, a Flashforge knock off. So far I have used PLA, ABS, and eSUN Flexible without any problems.

Any of the PLA based exotics should work just fine (wood, bronze, nylon, etc).

I tried eFlex (eSUN’s Ninjaflex), but was not successful.

pherbs_backyard · 2015-11-26T15:26:44.000Z

I have a Flashforge Creator Pro. Although not exotics, I regularly extrude HIPS as both a support for ABS and as the primary. Have also had good success with Nylon 618 and T-glase, both by Taulman.

JohnnyVF · 2015-11-26T15:49:56.000Z

Ah yeah, I also print HIPS pretty regularly

Invize · 2015-11-27T20:40:29.000Z

I’ve been using TPU (flexible) in my Creator Pro with pretty good results.

Bay3D · 2015-11-29T10:45:54.000Z

FWIW, Ive been running ColorFabb WoodFill on the Creator Pros here at Bay3D, and it works a charm.

bay3d_woodenmarvin_0.jpg1032×735 175 KB