Robin3D
December 20, 2016, 10:15am
32
Hi @Boelle ,
That’s correct, the FDM Quality Guidelines will be the same for all FDM printers. We can’t expect every customer to know what kind of quality they can expect from a specific printer model/brand so that’s why these guidelines will set a standard for all FDM printers.
Best,
Perry_1
December 20, 2016, 2:26pm
33
@Enza3D you are so smart.
Yes, there is no way, outside of the dimensions of the final X,Y,Z part, that a tolerance can be checked, in any realistic way, without donating hours to each model.
I would assume we are not being asked to load some software, put the model in, check the size of all the various features, check the tolerances on each, etc., and make sure they are all within spec.
SO, this dimensional accuracy should always be on the final XYZ measurement, as the tolerance “guarantee” if you will. The size that is displayed on the 3dhub page, or in the slicer software as bounding box size, if you will.
Robin3D
December 21, 2016, 3:21pm
34
@Enza3D , @Joerg_4 , @PepCo_Parker , @Perry_1
Hey guys!
Thank you all for expressing your concerns and giving me your feedback. I really appreciate it. The reason that we have to set guidelines on dimensional accuracy is because we have to draw the line somewhere and we thought setting a 1 mm tolerance would be a reasonable first step.
I completely agree with the fact that you, as Hubs, cannot know the application of your customer if they do not communicate it. Ofcourse in some cases you will have an idea by looking at the design that it’s part of an assembly and in this case you can double check with your customer if a 1 mm tolerance is sufficient.
But in most cases this is not the case and also, not your responsibility. If you receive a model from a customer and you print it within the guidelines that we as 3D Hubs set, you will be paid out for the job no matter what.
When a customer is not happy because the print does not exactly fit, we will ask them to take a photograph of the print next to a measuring device such as a digital caliper to show the exact size of the print. Of course we do want to keep our customers happy but this is not always the responsibility of the Hubs.
Feel free to reach out to the 3D Hubs admins (such as myself) at any point if you have a situation where the customer is not happy with the result but you printed the part according to the guidelines, we’ll definitely be able to help you resolve such a situation.
Best,
1 Like
Hello again Robin, So to me this means hubs will have to start watching our backs by taking photos our selves of parts with calipers next to them, it wouldn’t be hard to fake photos to make it seem like parts aren’t the right sizes when they really are. This would be the only way to insure people aren’t cheating us out of good parts, but even then now we have to charge for our time photographing and setting all that up
2 Likes
Enza3D
December 21, 2016, 4:56pm
36
My costs are definitely going to go up because of this; even if the verification is for my own insurance, it’s now another step I have to do for every print and that will be reflected in my prices. Because you’re right, there’s no way to prove it is correct unless I have already verified it myself and have pictures of it.
The problem is, how do I know if a dimension is right or not? Unless I have a parametric model file, or the customer explicitly specifies the dimension of a feature, I have no way of knowing (other than guessing from the STL) if it is correct.
6 Likes
My issue with these guidelines is quite simply the policing of them. Are you going to ask the customer to send you the 3D print so you can verify the dimensions yourself and make a ruling on it? Not every customer will have a set of calipers and even if they do, use them correctly to get an accurate reading.
Also this requires that I record how each model has been orientated in the slicer as your tolerances are in the X,Y and Z axis however that’s not to say that I printed a model along these axis. What if it’s a curved model that was printed at 45 degrees so that while the length of the curve is beyond the 1mm tolerance, the actual readings in the X,Y and Z axis weren’t?
And lets get something else right here, these guidelines aren’t designed to make my life as a hub easier, they are designed to make 3Dhubs job easier. I am now going to have to record, document and photograph more details of a print before sending it out.
4 Likes
That’s exactly my point. How could someone say what the customer shows tolerance wise is correct? It could very easily be wrong or misleading. In reality, 3D Hubs up until this point has in my opinion been running a great part just on mutual trust. If a customer requires a specific tolerance, as far as my experience goes they would specifically address this before I accepted the order, and I could respond accordingly. Same procedure as asking about infill, layerheight, material, and colour. Has tolerances become such an issue suddenly or is this merely a non existent problem being fixed. ‘Don’t fix it if it ain’t broken’. All I have to say is this is definitely going to impact customers who may have preferred just a cheap part and didn’t need tolerances greatly. It will certainly force us hubs to constantly watch our back now as an unruly customer can backlash quite easily and request an unfair refund. And I don’t mean to be Curt, but don’t respond saying all disputes are handled fairly. I have had situations before where I should not have lost money on jobs, but had to accept as 3D hubs heavily pushes for the side of the consumers. As well a fight in that situation would most likely have lead to a poor review and hurt my hub greatly. We are already at the will of the consumer, this is just giving them even more un necessary power. If a customer specifically needs a certain tolerance then I don’t see why they can’t just request this, why does 3D hubs specifically have to get involved?
3 Likes
Enza3D
December 22, 2016, 5:14pm
39
To keep it even somewhat fair, Hubs would have to physically measure the part themselves. A customer could easily take the pictures at a skewed angle to warp how the print looks or improperly calibrate calipers so that the device measures incorrectly. If a Hub hadn’t measured the part themselves, they have no defense in the dispute and I don’t think this thinking is being paranoid either. It’d be a quick way for a customer to get prints completed for free, and for larger jobs, I can see this happening quite a bit. It’s very easy to edit photos, and I will not accept that as the only way 3D Hubs decides if a print order was completed correctly or not.
If Hubs wants to implement dimensional accuracy requirements, then that’s fine but you have to be able to implement it/police it fairly and provide your Hubs with the tools they need as well. I feel like a broken record here, but getting dimensions from an STL file is inaccurate and inefficient; if I need to verify dimensions are correct (which now I do), then I need to know what they are in the first place . I can only do that if the customer tells me what they are in a drawing, or if I have the parametric model. I can ask a customer for the file, but if they don’t have it and can’t clearly communicate what dimensions are required, these new guidelines will force me to turn them away. The risk is too high otherwise.
2 Likes
I don’t like the idea of standard support removal, as I like to leave on as it helps protect the print while shipping.
1 Like
Hi Robin3D,
I think it would also be helpful if you could clearly mark on the photos what is wrong by placing an arrow or circle on it.
Not all that is on the photo will be not acceptable I guess.
Thanks! Keep up the good work!
Best regards,
Sandra
1 Like
Anyone else getting the vibe that regardless of the communities concerns 3D hubs went into this conversation with the mindset they were going to do it, and rather than maybe delaying the launch to address these issues and concerns they just ignored them and launched anyway?
2 Likes
Unfortunately yes. The managerial speak trying to make it sound like it will benefit me as a hub and big warning across the top of my dashboard saying it’s happening tells you all you need to know.
It’s getting towards the point where I’m considering if I want to be associated with 3Dhubs as the requirements are starting to pile up for the little cash you get back from the job.
cobnut
December 23, 2016, 12:02pm
44
Well, as far as dimensions are concerned, any decent slicing program will report the printing dimensions of the sliced model, so there’s no need to guess. In terms of getting the prints right (accurate to those dimensions) why shouldn’t they be? I know all my prints come out well within the tolerances suggested by 3DHubs so I don’t see the concern. I always check with a customer what the purpose of their print is anyway, and if I now have to remember to also specifically ask about tolerances, that’s really no big deal - heck, we could all easily put together a stock “first question” to cut and paste for any print order that covers things like this.
To be honest, I’m not seeing a problem here. If I were a customer, not a Hub, I’d expect there to be controls like this and I’d expect the printer to deliver me high quality prints that match the model I’ve uploaded. If my model is unprintable, or I want a dimensional accuracy that’s unrealistic, then that’s another matter, but the tolerances being suggested here seem very reasonable and totally what I’d expect from a paid service.
Sorry if this isn’t a popular view, but I can’t see the problem with wanting to produce high quality prints that match the customers’ requirements. Have I missed something here? Do the majority of Hubs often print models with inaccurate dimensions? Does no one else discuss the print with their customer to get an understanding of the job and any specific challenges?
3 Likes
Enza3D
December 23, 2016, 1:17pm
45
@cobnut The issue with using STL models for dimensioning is that they are dimensionless; what we get in a slicer is just the software’s representation of hundreds or thousands of triangles. Because of this curves become faceted, so if a customer has a small hole and they did not export it properly, they could easily end up with a hexagon instead of a circular hole. It’s just infinitely easier and more accurate to work from a parametric model than an STL file. It’s just poor practice in industry to dimension from STL files. To be clear, I do not have an issue with the set dimensional accuracy range or my ability to meet it. I have an issue with the complete lack of discussion as to how it’s going to be policed (sorry, but a picture won’t cut it) and the space for misinterpretation on the customers side as to what that means. I have already had to deal with customers giving me the wrong file and wanting a refund because it was “printed wrong” but the model was fundamentally wrong to begin with.
My concern isn’t hitting the targets, it’s people manipulating the system in their favour to receive free parts. Stl files Do Not show dimensions. Only overall. This will not show dimensions of inner details and walls. These new standards make it easy for someone to set a pair of calipers improperly and fight for a refund. Meeting the requirements is not at all the issue and I urge you to please read what we have discussed in the past.
4 Likes
As well if you had read my post, I expressed that I felt a large part of 3D hubs is just mutual trust and proper communication. I explained that my practice has always been to discuss with the customer what is needed for the part and if tolerances are needed. So my question is why does 3D hubs have to get involved now? I saw no issue with the system before. Really feels like they are simply creating problems to fix.
1 Like
Perry_1
December 23, 2016, 2:24pm
48
@PlastiPrint3D So I do not see this warning. Can you cut and paste it here?
@Robin
So far, I am uncomfortable with the wording that has been provided. Perhaps we could give some input on that before it goes live!
Here you go. Only reason I came looking in the forum threads for a topic on it as I generally don’t have the time to spend surfing here.
John3d
December 23, 2016, 8:41pm
50
remember with out our printers 3d hubs would be nothing you have a voice there is no benefit that i can see for a hub with the new rules apart from more work for us.
1 Like
Maybe instead of enforcing these rules the way they are, they should have provided tools to educate hubs on better ways to quote and accept an order, such as good questions to ask and topics to touch on when explaining. If people not getting the tolerances was an issue, this was not the way to go about it. Unfortunately it doesn’t seem 3D hubs really cares for our opinions on that, the distinct lack of response from any of their employees is only even more evident of that.
2 Likes
