This is simply one of the most superb printable models I have seen. I cannot thank you enough for uploading this to youmagine, making it available for everyone freely. Kudos to you.
Skip to main content
Very awesome. Can you upload all Cura settings / retraction, travel speed, other speed settings, fan settings, plugins /if you use/ and etc. /and version of software. That is is important i think. Can you remember G-code?
Really nice! Can you bring it to the Colorfabb meet-up tonight? I’d love to see it up close in person.
WOW…this is one of the best print i have seen 
Impressive! So many pieces and details!
Most of the time I have used some basic and the same settings: 0.1 mm layer thickness, 50 mm speed, retraction on, fans 100%, 210 degrees nozzle, infill 20 %, nozzle size 0.4 mm, base thickness 0.8 mm.
All parts are printed without brim, glue, blue tape or other stick stuff. I cleaned the glass plate with window cleaner to remove the dust and grease. With some build plate leveling and a clean glass plate on 60 degrees it will give this excellent results.
For a few parts (handles, brakes, clutches) I used 0.06 mm layer thickness and print 2 or more at the same time for more cooling of the pla. The clutches with feet steps need some support material of Cura.
The exhaust needed some support with Meshmaker sticks (3 sticks on the exhaust pipe), google is your friend if you want to know what i mean 
Last but not least, 1 handle has to be mirrored in Cura, there is only 1 handle on Youmagine!
I hope this is enough information for you to make an excellent Ducati too
Thank you
Amazing print, for the glue part i have the sollution: Abs glue ! It turns out ABS glue works even better on PLA,you can find it in your local hardware store. Look for hard plastic glue and check the back “suitable for ABS”.
Sweet!