Hi, I’m also looking for this, I got a heat nozzle set from ebay but the filament hole is too thin when compared to the one that comes with the printer - the original Teflon tube won’t fit.
I did find teflon tube for sale on ebay as well, but not the matching heat nozzle for the CTC 3D.
Also, the throats listed aren’t the same as the ones in the printer (i.e. smooth cylinder shaped) - the ones on show are mostly screw-types.
Any help on this would be great, thanks!
Hi Russell.
I have some spares including:
1) hot end M6 threaded tube with heat break. I do have some smooth ones too.
2) aluminium block for heater and thermocouple
3) glass fibre insulation for the heated block
4) 0.4mm brass hot extruder end
i don’t have any of the Teflon tubing that goes into the M6 threaded or smooth tube.
you can buy these parts in bulk from Aliexpress or eBay. That’s where I originally bought them from.
best regards
myles
Try uncle Chuck. He’s active on the Google groups, gives excellent service. Chuck is retired marine, located in the southwest U.S. started http://www.unclechucks3dprinterstuff.com 2 Your looking for mk9 stuff for the ctc.
Not without extensive modification. You will need either a genuine menu rep 1 dual cooling bar or a Carl raffle dual bar. Carl’s cooling bar needs the aluminum z carriage also as is wider. Carl’s carriage also needs a closed loop x axis belt.
Hi Russell. Parts are for sale. I need to work out a price for you. I’m away at a trade show tomorrow, but hopefully will get a price to you tomorrow evening if that’s ok. I think the most expensive parts are the botsteps, everything else is quite cheap. Best regards Myles
I’m not to worried about the electronics buddy its the other bits I need at the moment
thanks bud
Micro Swiss Online Store 4 I’m replacing my nozzle and throat with this mk10 upgrade so you don’t need a ptfe tube anymore and can print upto 300°c
I ended up buying spare nozzles on ebay, for the MK9 as I have a CTC 3D:
http://www.ebay.co.uk/itm/201311328257?\_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
The nozzle that came in isn’t even the same size as the ones that came with the printer: not as wide and the filament hole is too thin as well.
Did another buy for these: http://www.ebay.co.uk/itm/321796094101?\_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
From the pictures, these seem like the same model, but I’ll let you know once they arrive.
Also, decided to get some PTFE tube http://www.ebay.co.uk/itm/111513375750?\_trksid=p2057872.m2749.l2649&var=410506092329&ssPageName=STRK%3AMEBIDX%3AIT
Once I have everything I’ll let you know how these compare to the original installed parts.
Yes they should work on a ctc machine as they work on the replicator 1 and they fit the flashforge mk9 machines and it means you can use mk10 nozzles which are better don’t know how but bigger number = better
Hi russell. Sorry. Been away for a few days. Do you still need the parts? If so, please email me on myles.barker80@gmail.com. best regards. Myles
hi Myles yes I’m intrested in the bits ive sent a email but I don’t know if its sending my email address is russjenkins@virginmedia.com
