CTC drawing

gservers · 2016-03-22T12:07:56.000Z

Hello.

i need some assistance im in the progress of remaking the case of a CTC dual extrusion printer

it’s a clone of a makerbot.

i need drawing of the 4 side and bottom panels including the dimension on it

these may be made by hand or in any kind of format

any one that has a CTC dual could send them to me.

thanks

Spooke · 2016-03-22T12:27:24.000Z

Your best bet is to remove each panel and trace around it, if you’re going to hand make them.

gservers · 2016-03-22T12:44:37.000Z

Hello.

I’m not making it by hand im using a CAD prog.

And i don’t have a CTC printer butt on pics i found on the internet i see its a clone of a makerbot.

to be a 100% sure need the demsoins on a drawing.

the parts i currently redesigning are going to be made out of aluminium alloy.

I’m going to replace most of the parts made out of ABS ore Wood like most of the clone printers have now installed in it.

i already have made cad files for my makerbot butt maybe the could be used on the ctc as well

(i know the will fit on the flashforge pro because i got some drawing from the printer.)

Marc

MasterFX · 2016-03-22T15:40:10.000Z

But the CTC uses 5mm wood on the front and back, and 4,5mm wood on left and right.

gservers · 2016-03-22T16:52:47.000Z

But i say on an pic found on google that the location of the lcd and buttons are different to the makerbot.

and don’t need to download the files i allready made them for my makerbot

need only the lcd and buttons location and sizes for the front plate of a CTC machine

MasterFX · 2016-03-22T19:06:03.000Z

Ok, I just measured it on my CTC.

gservers · 2016-03-22T19:26:55.000Z

Master FX thanks a lot for your Pic and time

no i can redesign the front panel for the CTC also

i have a complete cad for fabricating all replacement parts that are now made out of ABS or wood for better print results.

butt whats the square above the push buttons for?

Thanks allot

Spooke · 2016-03-22T19:43:33.000Z

Would you share this CAD file? Please

gservers · 2016-03-22T20:45:03.000Z

What cad?? the files i Made from scratch

on the hand of user problems i came across on the inernet.

to make almost every printer better and sturdier. for better print quality.

and a much cheaper price then some upgrades you could find now.

let me think about that for a moment.