Auto-off-upon-finish Function: 3d Printer Auto-off Switchers at discount. This is a limited-time and sequential offer

[3dPrinterWorker]

Hello, fellow 3d hub members!

There are now 3d Printer’s Auto-off Switchers available that is able to switch the 3d printer off automatically once the 3d printer finishes printing. This is necessary for printings overnight and for printing-without-anyone-watching situations. When the printers are switched off after it finishes printing, the lifespan of the printer will increase and the energy resources will be saved. Similar to the fact that you will switch light bulbs off when they are not in use, you will switch 3d printers off when they are not in use as well. All 3d Printer’s Auto-off Switchers are unused and are brand new. I developed these 3d Printer’s Auto-off Switchers just recently, and they are, in fact, primarily to be used on my 3d Printer. That is the reason why I do not have a brand name for them yet. Now, because my 3d Printer is a Flashforge Pro printer, these Auto-off Switchers are primarily for Flashforge Pro printers as well. However, I can always customize these Auto-off Switchers for the actual user.

You can have a look at the pictue——since I am not able to post any videos, I will only post pictures.

I am in Calgary, Canada, and currently working at the only place in Calgary, Canada that sells, rents and repairs 3d Printers, as well as making objects with 3d Printers. Here is my contact information:

Phone #:403 9781007

Email address: wuyukun89@163.com

Once you contacted me, I will give you even more information about this 3d Printer’s Auto-off Switcher, including a demonstration video.

The price right now is 25 bucks per switcher. However, this price is only applicable for the first 5 users. After that, the prices will start to go up, usually an increase of 50 cents for each following user, and I have no guarantee as to how high the prices will go. The only way that you do not find yourself caught up in that situation is to contact me right away and not to get yourself behind the first 5 users. This is why I will say in the title that this is a “sequential order”. Also, only after you contacted me that I can tell you if you’re the 4th, 5th or 10th user, etc. This is why you may want to spread this information to other potential users as well——but that is up to you.

[3dPrinterWorker]

Sorry for the error: “Now, because my 3d Printer is a Flashforge Pro printer, these Auto-off Switchers are primarily for Flashforge Pro printers as well. However, I can always customize these Auto-off Switchers for the actual user.” should be “Now, because my 3d Printer is a Flashforge Creator Pro printer, these Auto-off Switchers are primarily for Flashforge Creator Pro printers as well. However, I can always customize these Auto-off Switchers for the actual user.”

[3dPrinterWorker]

Just so you know, this product is already on sale on eBay. Here is the link:

3d Printers Auto off upon finish Function 3d Printers Auto off Switchers for...

[3dPrinterWorker]

Sorry for the delay in updates. HERE is the link of the product on eBay:

Sustainable solution Auto off upon finish 3d Printers Auto off Switchers for...

[3dPrinterWorker]

Just so you know, I have updated the 3d Printer’s Auto-off Switcher! It can now switch the printer off after the printing is finished AND after the extruder’s temperature becomes lower than 50℃. This is, as you are able to see, a must-have feature for this device to work properly. In the meantime,I have a new demonstration video that shows the operation of this version of 3d Printer’s Auto-off Switcher. However, you will, again, have to email me before you can see this demonstration video.
In the meantime, you can find this device on eBay through the following link:
https://www.ebay.ca/itm/362513157228
All to the best!

[3dPrinterWorker]

Just so you know, the site of this product on eBay is updated again! It is now https://www.ebay.com/itm/362537607553.

[3dPrinterWorker]

For your information, I have updated the 3d Printer’s Auto-off Switcher again! Below is its picture:

All to the best!

[3dPrinterWorker]

Hello all my dear colleagues and friends!

I have updated the 3d Printer’s Auto-off Switcher again! Above is a picture of the updated version and below is the ebay site of the updated version!
https://www.ebay.ca/itm/362537607553