Advice needed for non-tech dad for child xmas present!

dbriere · 2017-12-16T19:02:09.000Z

I want to get my child the parts needed for him to assemble this for his bike:

Bike wheel induction safety light by tomz4

It's a safety light for your bike that doesn't need batteries. Ever. It also has smart on/off function. Light turns on when you start moving and turns of about 5 seconds after you stop moving.

Can anyone tell me what sort of material I should have this made in, so I know what to “order” from a 3D Printing Service? What should I exactly tell them?

Thanks in advance – I’m so not a techie but my kid is!

MaddieG · 2017-12-16T21:24:00.000Z

Hi there,

Based on the settings the creator posted in the Thing page, I would bet that this was printed in PLA. If you want it to be really strong or last longer though, I’d recommend PETG or ASA.

I hope this helps!

Best,

Maddie - 3D Hubs

3DAmsterdam · 2017-12-17T00:44:16.000Z

I think PLA from a good brand so that it is strong, when using a material that is warping you ruin your thread.

dbriere · 2017-12-17T16:42:15.000Z

Thanks!

dbriere · 2017-12-17T16:42:31.000Z

Thanks!

grantpsd · 2017-12-18T06:21:22.000Z

I would use either ABS or PETG. Should be Translucent filament of the color of your choice.

Johnnyo1012 · 2017-12-18T14:23:56.000Z

@dbriere We can print the files for you and could get them to you on time for Christmas if you order from us.

Order from this link- https://www.3dhubs.com/service/jmotechnology

Email- support@jmotechnology.com

Thanks.