21

I can scan them. I’m in Texas.

Jeffrey Opel

(817) 400-1076

22

Hi Alex,

Maybe I can be of assistance - Please goto my WEB site http://www.zip-bit.com and fill out a RFQ → http://www.zip-bit.com/request\_for\_quote.php
I have over 12 years of experience providing 3D Engineering Services - 3D Scanning, 3D Modeling, 3D Printing and 3D Rapid Prototyping

Best regards,

-jay-

23

My business has a scanner that we use for CAD creation, unlike a lot of other scanners mine can output .stp or .iges files. It is typically accurate for around .005". Feel free to check out my website (3D Scanning) for more specifications. If interested, I could send you a sample file of something I have scanned. For high resolution parts will typically need 2 scans that take around 30 minutes each to complete. I typically charge $4/hour for the scanner to run and $10-$20 of CAD processing for each part. This is all ballpark pricing just to give you an idea.

24

Hello Alex,

I would be glad to help you. I have a 3D scanner please contact me on my HUB https://www.3dhubs.com/service/5498

Best regards

Josue

25

Hello, Would you please send me some picture about what you want to scan? youcan3d@gmail.com We are 3D scan and 3D print services provider Youcan3d.com Thank you. Youcan3D

26

Alex,

I can help you with the action figure.

If you would care to give me a call @ 602-339-4166 we can talk details.

As far as cost goes, the figures would be about $35 for the 1st and depending on qty, we can work something out.

Ted

27

Hi!

I added specifics about the figure and detailed number of parts. Let me know if you’re still interested in the project

28

Hi!

I added specifics about the figure and detailed number of parts. Let me know if you’re still interested in the project

29

Hi!

I added specifics about the figure and detailed number of parts. Let me know if you’re still interested in the project

30

Hi!

I added specifics about the figure and detailed number of parts. Let me know if you’re still interested in the project

31

Hi!

I added specifics about the figure and detailed number of parts. Let me know if you’re still interested in the project

32

Alex,

I’ve never seen this soldier before. I bet there is a good back story.

To do what your asking is not a problem. Not the easiest thing, but doable

If you look at my hub, I have 3 examples of what you are asking.

1st is a fish. The fish is a customer design which was then used to create a mold.

2nd are the minions. Just for fun I scanned in the yellow original Minion, resized it then printed.

3rd is a set of rings. To check detail, check out the initials on the inside of the rings.

The cost for scanning all the parts would be about $200-250.

What I typically do is provide the scanning at no cost provided I do the printing.

Printing cost is found on my Hubs page.

And of course I can work a deal on volume. :slight_smile:

Ted@Legionnairedesign.com

602-339-4166

33

Nice Cobra Trooper :slight_smile:

I’ll give ya the GI JOE Real American Hero deal: $200 all parts scanned and delivered in STL and OBJ formats. Clean and water-tight 3D-Print ready.

- Devin

34

Devin:

what country are you on?

35

Hey Alex,

I’m in the U.S.
Vashon Washington (near Seattle)

36

Is there an email I can contact you at?

37

Devin@YOUto3D.com

38

Let me know if I can help answer any questions you might have.
Where are you located?