3000 - 4000 full color / mono chrome sandstone/abs/pla busts required.

[bubblebit]

Hi Abhi,

I would love to run a small production for you in PLA. Please have a look at http://www.doubleme3d.nl/ for some samples.

Best regards,

Merijn

https://www.3dhubs.com/rotterdam/hubs/bubblebit

[obelix]

@abhi_nandy Fell free to contact me, i’ve done a lot of PLA monochrome Bust and full-body miniatures.

[obelix]

@abhi_nandy Here is my hub: https://www.3dhubs.com/karlsruhe/hubs/christian

[OrlandoH]

Hi Abhi,

I have several MakerBot 3D printers that can print pla. Also on the projet 660 (full color) can be printed. If you want I can make them

We print very frequently busts.

https://www.3dhubs.com/ghent/hubs/orlando

https://www.facebook.com/pages/3d-printing-Gent

regards,
Orlando

[OrlandoH]

Log in or sign up to view

[Fare3D]

Hi @abhi_nandy,

We are Fare3D a 3d printing startup based in Milan, Italy (but we deliver all over the world).
We can print Full color with our 3DSystem Project 4500 (it prints with VisiJet C4 Spectrum material, a plastic material with excellent flexibility and strength) and Monochrome with ours ABS Makerbots 3D Printers.

For any other information please contact us on:

https://www.3dhubs.com/milan/hubs/fare3d

[Joerg_4]

@abhi_nandy

Hi Abhi,

I would love to print a couple of bust for you. PLA monochrome (32+ colors available) or BronzFill is possible.

Looking forward to your reply

My hubs site: https://www.3dhubs.com/bremen/hubs/joerg

Cheers,
Joerg

[abcimaging]

Hi Abni,

Please contact me regarding your busts we have a projet 660 full coulur

this is our bread and butter please visit our website abc imaging were you can find my details

Lee

[Magnatronics]

Hi, I can help with printing in ABS and PLA. Do you have any more details on the requirments you need to meet like color of plastic, model size, where they are being shipped to?

[Voudas]

Hi, you can visit our web pages: www.b3d.gr and www.i3du.gr and our hub https://www.3dhubs.com/athens/hubs/3dbox-voudas and get in touch with us with more info about your project. This is what we specialize in.

[Lil_3D]

abhi_nandy,

I can help cover off as much of this volume as you would like in any of the requested materials. Drop me a line at my hub.

https://www.3dhubs.com/toronto/hubs/lil-3d-printing

Mark.

[PrintedInSpace]

Hi there,

need some more help ? I have 2 finely tuned Ultimakers, can print PLA or sandstone. Good quality prints only. Been printing commercially in my Amsterdam print shop for 1,5 years now.

Regards,

Erik

[Ralph_3]

Let me know the details.

[Dr_Idee_B.V]

Hi!

Abhi, i can help you with my Zcorp multicolor sandstone printer!

Best regards, Jeroen.

[Tom_6]

We can help you out with our Zcorp 650 full color sandstone printer.

We also have an Ultimaker, a Zortrax, a Tripodmaker, a Big Builder,

a Leapfrog, and a Roland DLP printer.

We are located in Antwerp, Belgium and have been printing B2B

and B2C for 2 years now.

Check us out : www.3dprintfactory.me

[Gaetano_1]

Hi Abni I can Help I have mendelmax , let me know if you need

Cheers, Gaetano

[Alexandre_16]

Hello, i can help, i am Marceau’s Hub in Paris at 3DHubs. I have an Ultimaker 2. artitec@magic.fr

Best regards

Alexandre

[PHYSI3D]

Hi,

Can print in ABS, PLA, and sandstone.

Regards,

Cameron Naramore

PHYSI3D

[Nacho]

We are experts in baby busts. We can print you fine quality monochrome busts. You can view our past reviews. Here y

[Sculped]

Hi Abhi,

I we can help out with a ZCorp 650 in full color as well. PLA/ABS is done on several machines with a resolution of 25 micron. Depending on the need, we can dedicate printers specifically to your job.
We operate and therefore ship from Belgium.

We also deliver 3D scanning services if deemed necessary.

If you would be interested, feel free to contact us on info@sculped.be.