Skip to main content
9 results for@thormj #3d-printing
Advanced filters
Relevance
Relevance
Mar '15
-
My method of unclogging / cleaning between colors is to use nylon ( http://bukobot.com/nozzle-cleaning ): 1. Heat to 235, extrude 10 mm of nylon ('til...
Apr '16
-
I used to use oil, but now I use a coat of WS2 or HBN dry-lube. This coat lasts for over 100 hours run time (usually something else has gone wrong, so...
Oct '15
-
I use a flexible version from Microcenter, but haven't used Ninjaflex yet on my Robo3D R1. I've made some changes so it feeds better, but it can still...
Apr '16
-
Out of curiosity, why are you using HIPS? I've found: PLA - Best dimensional accuracy, but shatters ABS - Tougher, can warp a bit. Wears better than PL...
Mar '16
-
Use fans on, maybe increase your "minimum time per layer". If you have a heated bed, make sure it's turned down (60c gets too hot… I keep mine @40C for...
Sep '15
-
Oh, and if your vertical walls are wavy, check the tension on X & Y belts. They need to be taught; I used a different zip-tie config than stock so I ca...
Oct '15
-
The problem for flex feeding is the large gap between the bottom of the hobbed bolt and the entrance to the hole in the extruder frame. Some people put...
Oct '15
-
It can, but it's a bit oozy. You have to run at 1/4rd speed with the stock arrangement (and it might still jam). I modified mine and have it up to 1/2...
Apr '15
-
I haven't yet, but the temperature range seems ok… willing to try if you want…