Skip to main content
5 results for@thormj #3d-printers
Advanced filters
Relevance
Relevance
Apr '16
-
I used to use oil, but now I use a coat of WS2 or HBN dry-lube. This coat lasts for over 100 hours run time (usually something else has gone wrong, so...
Apr '16
-
Out of curiosity, why are you using HIPS? I've found: PLA - Best dimensional accuracy, but shatters ABS - Tougher, can warp a bit. Wears better than PL...
Sep '15
-
Oh, and if your vertical walls are wavy, check the tension on X & Y belts. They need to be taught; I used a different zip-tie config than stock so I ca...
Oct '15
-
The problem for flex feeding is the large gap between the bottom of the hobbed bolt and the entrance to the hole in the extruder frame. Some people put...
Oct '15
-
It can, but it's a bit oozy. You have to run at 1/4rd speed with the stock arrangement (and it might still jam). I modified mine and have it up to 1/2...