Skip to main content
7 results for@Elliott8 #3d-printers
Advanced filters
Relevance
Relevance
Jan '18
-
Generally speaking with FDM printers, the tell tail sign for a clog is when the extruder stops extruding correctly part way through a print. In this ca...
Dec '17
-
That is weird. My first recommendation would be to experiment with your flow rate (I would try increasing it). Increasing the temperature slightly as w...
Dec '17
-
How exactly did you load the gcode profile? If you are not already doing it this way, I would go to the start/end gcode menu in cura and past in the ca...
Nov '17
-
The original fan duct should just barely clear the end of the nozzle. My assumption is that the bed leveling is off resulting in numerous issues. Would...
Nov '17
-
It is a little hard to tell from the picture, but it appears you may have some temperature issues as well (print looks to be curling up?). For PLA, I w...
Nov '17
-
My first assumption would also be that the wall thickness is too thin. Since your printer has a .4mm nozzle, the wall must also be at least .4mm thick....
Sep '17
-
Personally, I would recommend using a raft. I use Cura for slicing and the automatically generated raft has completely removed warping. Furthermore, if...