

Ready to test your design? Upload your parts for free DfM analysis.
Get instant quote
Material type
Plastic
Material name
Formlabs High Temp Resin
Process compatibility
SLA

This resin has a high deflection temperature (hence its name), which is the ability to withstand high temperature without deforming under specific pressure. The heat deflection temperature for this resin is 120°C for 0.45MPa or 238°C if it goes through additional thermal curing processes.
Mechanical properties
Ultimate tensile strength
20.9 (green) or 58.3(post-cured) MPa
Young's modulus
(modulus of elasticity)
(modulus of elasticity)
0.75 (green) or 2.8 (post-cured) GPa
Elongation at break
14(green) or 3.3 (post-cured) %
Physical properties
UV resistance
No
Thermal properties
Thermal expansion coefficent
118.1 (green) or 79.6 (post-cured) 10^-6/ºC
Electrical properties
ESD Safety
Yes
Post treatments
Post-Processing
Post-curing
Common applications
Hot fluid flow molds & inserts
Heat resistant mounts
Housings
Fixtures